Products

MALAXY, a leading fastener manufacturer headquartered in Shanghai, supplies premium wood screws — thread-forming fasteners specifically engineered for joining two pieces of wood together. Unlike fully-threaded machine screws or self-tapping screws, wood screws feature a sharp gimlet point (tapered tip) and a partially unthreaded shank that allows the top piece of wood to slide down the smooth shank and clamp tightly against the bottom piece as the threaded portion engages.

Wood screws are designed to cut their own path into wood through compression of wood fibers — not by cutting or removing material. The coarse-pitch threads provide superior holding power in softwoods, hardwoods, plywood, MDF, chipboard, and other wood-based materials.

Key Distinction from Self-Tapping Screws: Wood screws have a gimlet point (sharp tapered tip) and a smooth unthreaded shank that allows two wood pieces to be drawn tightly together. Self-tapping screws typically have a full-thread design and are intended for sheet metal, plastic, and other hard materials — not optimized for wood-to-wood clamping applications.

Global wood screws market was valued at USD 4.68 billion in 2025 and is projected to grow at a CAGR of 4.99%, reaching USD 6.58 billion by 2032. As a leading supplier, MALAXY is well-positioned to serve this growing demand.

Partially Threaded vs. Fully Threaded — Critical Distinction

The partially unthreaded shank is the defining feature of a wood screw:

Standards & Compliance

MALAXY wood screws are manufactured in strict compliance with major international standards:

Metric Standards (DIN Series)

Inch Standards (ASME Series)

All products undergo rigorous quality control including dimensional verification, thread gauge inspection, hardness testing, and mechanical performance validation per applicable standards. MALAXY maintains ISO 9001:2015 quality management certification throughout the manufacturing process.

Material Grades & Mechanical Properties

Material Selection Guide:

• Stainless Steel 316 — Maximum corrosion protection; marine, coastal, and chemical environments.

• Stainless Steel 304 — Best balance of corrosion resistance and cost for outdoor/general use.

• Carbon Steel — Cost-effective for indoor woodworking and general construction.

• Brass — Non-magnetic, decorative, conductive; for antique restoration and electrical applications.

Surface Finishes

Key Applications

1. Furniture Manufacturing

Securing joints in chairs, tables, cabinets, bed frames, shelving units, and ready-to-assemble (RTA) furniture. Flat head countersunk screws provide flush finishes for smooth surfaces.

2. Construction & Carpentry

Framing, flooring installation, roof trusses, wall paneling, window and door frames, staircases, and general structural wood connections. Hex head wood screws (DIN 571) specified for heavy-duty structural applications.

3. Cabinetry & Millwork

Kitchen cabinets, bathroom vanities, custom millwork, drawer assembly, face frame attachment, and hinge installation. Fine-thread screws preferred for hardwoods.

4. Decking & Outdoor Structures

Wooden decks, pergolas, gazebos, fences, garden sheds, and outdoor furniture. Stainless steel 304/316 recommended for corrosion resistance in outdoor environments.

5. Marine Construction

Boat building, docks, piers, marinas, and coastal structures. Stainless steel 316 (A4) provides superior saltwater corrosion resistance.

6. Flooring Installation

Hardwood floor planks, engineered wood flooring, subfloor attachment, and stair tread installation.

7. Pallet & Crate Manufacturing

Wooden pallets, shipping crates, export packaging, and industrial containers. Cost-effective carbon steel screws with zinc plating.

8. Joinery & Woodworking

Mortise and tenon reinforcement, dowel joint supplementation, edge joining, and general fine woodworking projects. Brass wood screws for antique restoration and decorative joinery.

Key Features

1. Gimlet Point – Sharp, tapered tip that penetrates wood fibers without excessive splitting, guiding the screw into the material

2. Partially Unthreaded Shank – Smooth upper section allows the top wood piece to slide down and clamp tightly against the bottom piece; the defining feature of a wood screw

3. Coarse-Pitch Threads – Deep, sharp-crested threads designed to compress wood fibers for maximum holding power in wood substrates

4. Thread-Forming Action – Forms mating threads by displacing and compressing wood fibers, not by cutting material

5. Multiple Head Styles – Flat countersunk (flush finish), round head (exposed decorative), oval head (raised countersunk), bugle head (splitting prevention), hex head (high torque)

6. Multiple Drive Options – Slotted (traditional), Phillips (self-centering), Pozidriv (enhanced torque), Torx (maximum torque), Square (Robertson), and Hex

7. Single & Double Thread Options – Double/twin thread designs provide faster insertion speeds (up to 2× faster than single thread)

8. Multiple Material Options – Carbon steel (cost-effective), stainless steel 304/316 (corrosion-resistant), brass (decorative/non-magnetic)

9. Multiple Surface Finishes – Zinc plating, black oxide, phosphating, passivation, Dacromet/Geomet

10. Global Standard Compliance – Manufactured to DIN 95/96/97/571/7995/7996/7997 and ASME B18.6.1

Customization & OEM/ODM Services

As a leading fastener manufacturer with decades of industry expertise and a strategic headquarters in Shanghai, MALAXY offers comprehensive customization and OEM/ODM services for wood screws:

• Custom lengths and diameters beyond standard ranges

• Special head styles and drive configurations

• Special material grades (stainless steel 304/316, brass, titanium)

• Proprietary surface treatments and coating systems

• Custom thread designs (single/double/triple thread)

• Special point geometries for specific wood types

• Logo marking and custom packaging solutions

• Color-matching for architectural and furniture applications

Our in-house engineering team supports OEM and ODM projects from prototype to mass production, with strict adherence to ISO 9001:2015 quality management systems. MALAXY maintains full traceability from raw material sourcing to finished product, providing mill test reports (MTRs), dimensional inspection reports, hardness test reports, and certification upon request.

Why Choose MALAXY?

• Headquarters in Shanghai – Strategic location with efficient global logistics, direct port access, and strong English-speaking export support teams

• Industry-leading reputation – Recognized as a top-tier fastener supplier across Asia, Europe, North America, the Middle East, and Latin America

• Comprehensive quality control – Full inspection from raw material to finished product, including dimensional verification, thread gauge inspection, hardness testing, and mechanical performance validation

• Global standard compliance – Full certification to DIN 95/96/97/571/7995/7996/7997 and ASME B18.6.1; ISO 9001:2015 certified; RoHS/REACH compliance

• Competitive pricing – Direct manufacturing with integrated production lines, no middlemen

• Global export experience – Serving clients across North America, Europe, Southeast Asia, the Middle East, Latin America, and Africa

• Technical support – In-house engineering team available for application consultation, pilot hole sizing guidance, wood type recommendations, and custom design development

Contact MALAXY today for quotes, technical specifications, custom manufacturing inquiries, sample requests, or engineering consultation.