Tel: +86 18018587352 | WhatsApp: +86 18018587352 | Email: ok@malaxygroup.com

bj

News

Home News High-Strength Fastener Coatings: Two Checks Beyond Corrosion

High-Strength Fastener Coatings: Two Checks Beyond Corrosion

Recent technical guidance published in September and October 2026 highlights a purchasing issue that can disappear behind a finish code: a coating affects more than corrosion protection. On high-strength bolts, the coating process can influence hydrogen-embrittlement risk, while surface friction affects tightening and clamp load.

For fastener manufacturers, wholesalers and construction buyers, the practical takeaway is simple: check the coating process and the tightening conditions before accepting a substitute.

Hydrogen embrittlement: check the process, not just the finish

Hydrogen embrittlement can cause delayed cracking in susceptible high-strength steel fasteners under sustained tensile stress. The risk involves three elements: a susceptible material, a source of hydrogen and tensile loading. Acid cleaning and electroplating are processing steps that deserve particular attention.

Non-electrolytic zinc-flake coatings avoid the electroplating step that can introduce hydrogen. That makes the application route worth examining when specifying high-strength hardware. It does not justify treating every zinc-flake-coated bolt as risk-free: the material and the rest of the manufacturing route still need review.

A useful purchasing specification should therefore go beyond “corrosion-resistant finish.” Ask the supplier to identify the material grade, surface preparation, coating method and the evidence used to assess the finished fastener. Agree on what documents will accompany the supplied lot, rather than leaving that discussion until installation.

For distributors comparing quotations, this is an important distinction. Two bolts with similar-looking finishes may not have followed the same processing route. A finish name alone is not enough information to approve an alternative for a safety-critical joint.

Coating friction: confirm the tightening conditions

A large share of tightening torque is spent overcoming friction. Change the surface condition, and the relationship between applied torque and clamp load can change too. A torque value used for one finish should not automatically be carried over to a different coating or lubrication condition.

Before approving a coated replacement, ask the assembly designer or responsible engineer to confirm the tightening procedure for the actual bolt, nut and washer combination. Keep the coating and lubrication condition explicit in the specification, so the purchasing team and installation crew are working from the same information.

For a practical request for quotation, include:

  • The drawing, dimensions, thread and material grade.

  • The service environment and required corrosion performance.

  • The coating method and any lubrication requirement.

  • The tightening method and required inspection records.

MALAXY supplies carbon-steel, alloy-steel and stainless-steel fasteners, including bolts, threaded rods, nuts and washers, with custom production to drawings or samples. For buyers consolidating standard and non-standard items, that range provides a starting point for a coordinated enquiry—not a substitute for application-specific engineering approval.

Send MALAXY your drawing and service conditions to discuss the fastener and finish together, before the order is placed.

Other Articles

EV Growth Is Reshaping Engineered Fastener Demand

IntroductionThe rapid growth of electric vehicles (EVs) is transforming the automotive fastener industry.According to the International Energy Agency (IEA), global electric car sales exceeded 20 million units in 2025, accounting for approximately 25% of new vehicle sales. Global EV battery deploymen

Plastic Screw Installation Torque: Prevent Stripping, Cracking & Pull-Out

Plastic Screw Installation Torque Is Becoming a Critical Quality Control Focus: How to Prevent Stripping, Cracking and Pull-OutIntroductionPlastic components are widely used in automotive interiors, electrical enclosures, household appliances and industrial equipment.As manufacturers increasingly ad

Thread Rolling vs. Thread Cutting: What Are the Differences?

Learn how thread rolling and thread cutting differ in strength, fatigue resistance, production efficiency, cost and applications in fastener manufacturing.